TLR ventilation fan
HIMEL TLR ventilation blower
For mobile use where high air pressures are required
The TLR is particularly suitable for small to medium-sized storage facilities and is nevertheless pressure-stable even with high storage silos. It consists of a sturdy sheet steel housing with trolley and handle. Versatile for a wide range of aeration systems, ideal for keeping your grain healthy!
Powerful electric motor direct drive (3000 min-1) 400V
- Intake opening with protective grille on the right and galvanised discharge nozzle
- Fast and effective with high pressure
- With motor protection switch
- With rain cover
The use of a HIMEL aeration fan quickly pays for itself, because 18 % moist grain is worth just under 5 % less.
BLG aeration blower
HIMEL BLG
aeration blowers are specially designed for medium-sized, large silos and especially for large-area flat storage silos.
BLG blowers have a very high efficiency and still run very quietly and stably even at high air volumes;
- Low-pressure blower with direct drive electric motor (1500 min-1) 400V
- Sturdy galvanised sheet steel housing in large-volume design
- Intake opening with protective grille on the right
- With floor console for stationary installation
The use of a HIMEL aeration fan quickly pays for itself, because 18 % moist grain is worth just under 5 % less.
Ventilation rocket
HIMEL ventilation rocket
with powerful 1.5 kW or 2.2 kW motor, 1,900 - 2,800 m3 air output. For selective aeration of heat pockets in grain, rapeseed, grass and other free-flowing products. The aeration fan processes an area of approx. 16 m2. Depending on the stored product, the air flow reaches about 1 m deeper than the aeration pipe. The blower can also be used as a suction blower with a conversion kit!
The aeration blower with 2.2 kW motor and motor protection switch is designed for mobile use. Air output approx. 2,800 m³/h.
Mounted on the suction side as standard, so the moist and/or warm air is drawn directly out of the grain and not just pushed to the side.
Perforated piercing lance ∅=120 mm, length approx. 2.30 m.
Thermometer mounted on the pressure side.
The use of a HIMEL aeration blower quickly pays for itself, because 18 % moist grain is worth just under 5 % less.
Ventilation ducts
HIMEL ventilation ducts
are suitable for the construction of final storage drying and aeration facilities. The aeration ducts and the corresponding accessories are designed for all sizes and shapes of grain silos (round silos, rectangular storage silos or storage sheds). All ventilation ducts are galvanised and can withstand loads up to 12 m grain bulk height.
HIMEL aeration systems and 70 years of experience in agricultural engineering make your storage perfect.
Hall ventilation ducts
Ventilation duct galvanised for traffic:
Slotted perforated plates, for duct lengths up to 12 m
- Max. Wheel load up to 7 t, calculated according to DIN, with safety factor (without safety factor approx. 10 t. Calculation according to bridge class!)
- Simple emptying of halls with front loader
- Air permeability approx. 11 % (suitable for drying)
Shuttering system for ventilation duct:
- Galvanised material 1.0 mm
- High dimensional accuracy of the formwork
- Good cleaning options for the air ducts
- Mould is supplied unassembled
Telescopic ventilation pipe
HIMEL telescopic ventilation pipes
are galvanised ventilation pipes, partially perforated for flat storage ventilation with Ø300 mm blow-in opening
The telescopic tube is mechanically pulled out of the full grain store using an internal cable fastening. Thanks to their modular design, they can be easily extended as they consist of several tube elements, each 2 metres long. Individual elements have a sealing mechanism and are also suitable for rapeseed with a perforation of Ø1.5 mm. HIMEL telescopic aeration tubes can be loaded up to a debris height of 5 metres.
